The installation standard of the street light(2）

Street lamps
1. (street light)Lamps and lanterns shall be firm and upright, and shall not be loose or skewed.

2. (street light)The lampshade shall be intact without breakage.

3. (street light)If the enamel umbrella is rusted and deformed, it shall be replaced.

4. The reflector of the lamp fails and should be replaced.

5. The reflector of lamps and lanterns shall not be damaged or deformed during transportation and installation. The lampshade shall be provided with rubber rings to make it bright after wiping. When the lamp mouth is broken and exposed copper of porcelain, it shall be replaced.

6, lamps and lanterns can not be bent, all parts of the fixed screws need to add spring Eyeliner tight, refuse to loose.

7. The cast iron lamp cap is cracked and cannot be used if it falls off. It is unqualified without rubber.

8. The lamp body hoop shall be suitable for the pole, and the fitting of the device shall not be too long.

9. The transparent cover and reflector of the lamp body shall be cleaned and wiped during maintenance, and those that cannot be cleaned on site shall be replaced.

10. The retaining ring of the transparent cover shall be complete and easy to use to prevent the cover from falling off, and the reliable hook shall be applied.

11. The dust-proof felt strips of lamps shall be complete, and those incomplete shall be repaired and replaced.

12. The lamp lump and the lamp tube flange must be matched with cracks and scars, the screws shall be complete, and the bolt length shall be able to penetrate the lamp lump flange.

13. When a lamp is suitable for bulbs of different specifications, the fixing point of the lamp port shall be adjusted to the same position as the bulb capacity to obtain the best light distribution curve.

14. All iron parts shall be free of serious corrosion, cracks, scars, etc. if the paint skin is rusted off, it shall be derusted, painted or galvanized.

15. (street light)The lamp cap lead of closed lamps shall be protected by heat-resistant insulating pipe (asbestos pipe or porcelain pipe).